Price: ₹5,999 - ₹2,999.00
(as of Sep 21, 2024 17:03:24 UTC – Details)

OEM Replacement Part (Infrared FPC Flex Cable) is used in the Repair & Maintenance of the non-working Face ID Module(integrated into the Front Camera) of the iPhone. The second most common cause of non-working Face ID is worn and torn or damaged Infrared FPC Flex Cable. Replacing the defective Infrared FPC Flex Cable with a new Flex Cable often solves the issue and brings the Face ID Module back to work. With the release of the iPhone X, the Face ID was introduced. Unlike other Cell Phones, iPhone’s Face ID is locked, meaning once the iPhone Face ID or Front Camera is damaged, Face ID cannot be activated even if you swap the Front Camera Module from another iPhone (same model), the Face ID feature won’t work. The Front Camera Module has been paired to the Logic Board. It gives 3rd Party repair, a hard time, the only possible outcome is to swap the Original Infrared FPC Flex Cable with a replacement part. Please Note: 1. Flex Cable cannot be used alone. There is a need for a Programmer to test the issue in the non-working Face ID Module(integrated into the Front Camera) of the iPhone. Most of the time the issue gets resolved by replacing the Dot Matrix Projector Flex Cable or Infrared FPC Flex Cable. But there is a need to check the TEST STATUS of the Face ID Module before commencing on replacing the Flex Cable. Even after assembling it’s required to be tested to determine whether the problem is resolved. 2. It is rare. yet a possibility that even after replacing the Infrared FPC Flex Cable, the Face ID won’t be working. This may be because of multiple reasons like the repair work is not done properly or some other component is damaged during repair work or maybe the Dot Matrix Chip is damaged. 3. Programmer is not included with this Infrared FPC Flex Cable. However, it’s a must-have for the repair of non-working Face ID Modules. The Programmer helps in diagnosing the issue for the non-working of the Face ID Module.
Brand New and Premium Quality: OEM Replacement Part(Infrared FPC Flex Cable) used in the Repair & Maintenance of the non-working Face ID Module(integrated into the Front Camera) of the iPhone. The second most common cause of non-working Face ID is worn and torn or damaged Infrared FPC Flex Cable. Replacing the defective Infrared FPC Flex Cable with a new Flex Cable often solves the issue and brings the Face ID Module back to work.
Compatibility: Compatible with A2215 (International), A2160 (USA, Canada, Puerto Rico, U.S. Virgin Islands), and A2217 (China, Hong Kong). Compatible only with iPhone 11 Pro (Excludes iPhone 11, and 11 Pro Max).
Identifying & Resolving Face-ID Error: There is a need for a Programmer to test the issue in the non-working Face ID Module(integrated into the Front Camera) of the iPhone. Most of the time the issue gets resolved by replacing the Dot Matrix Projector Flex Cable or Infrared FPC Flex Cable. But there is a need to check the TEST STATUS of the Face ID Module before commencing on replacing the Flex Cable. Even after assembling it’s required to be tested to determine whether the problem is resolved.
Quality: The Quality is the same as the Original, the Infrared FPC Flex Cable is not known to give any trouble if installed properly. Please be careful while doing the repair work as all parts are very fragile and do a test with the Programmer before assembling it in the iPhone. Kindly Note: Programmer is not included with this Infrared FPC Flex Cable. However, it’s a must-have for the repair of non-working Face ID Modules.
DIY(Do-It-Yourself) Repair: Please do not try DIY Repair unless and until you are a professional in repairing work or have done such DIY projects before. We are not responsible for any damage caused during the repair work. Getting the old Infrared FPC Flex Cable off is the hardest part of this entire process aligning the new Infrared FPC Flex Cable is a must. Even professionals need hours to complete the task. It is advised to seek professional help to replace the Infrared FPC Flex Cable.

Price: ₹5,999 - ₹2,999.00
(as of Sep 21, 2024 17:03:24 UTC – Details)

OEM Replacement Part (Infrared FPC Flex Cable) is used in the Repair & Maintenance of the non-working Face ID Module(integrated into the Front Camera) of the iPhone. The second most common cause of non-working Face ID is worn and torn or damaged Infrared FPC Flex Cable. Replacing the defective Infrared FPC Flex Cable with a new Flex Cable often solves the issue and brings the Face ID Module back to work. With the release of the iPhone X, the Face ID was introduced. Unlike other Cell Phones, iPhone’s Face ID is locked, meaning once the iPhone Face ID or Front Camera is damaged, Face ID cannot be activated even if you swap the Front Camera Module from another iPhone (same model), the Face ID feature won’t work. The Front Camera Module has been paired to the Logic Board. It gives 3rd Party repair, a hard time, the only possible outcome is to swap the Original Infrared FPC Flex Cable with a replacement part. Please Note: 1. Flex Cable cannot be used alone. There is a need for a Programmer to test the issue in the non-working Face ID Module(integrated into the Front Camera) of the iPhone. Most of the time the issue gets resolved by replacing the Dot Matrix Projector Flex Cable or Infrared FPC Flex Cable. But there is a need to check the TEST STATUS of the Face ID Module before commencing on replacing the Flex Cable. Even after assembling it’s required to be tested to determine whether the problem is resolved. 2. It is rare. yet a possibility that even after replacing the Infrared FPC Flex Cable, the Face ID won’t be working. This may be because of multiple reasons like the repair work is not done properly or some other component is damaged during repair work or maybe the Dot Matrix Chip is damaged. 3. Programmer is not included with this Infrared FPC Flex Cable. However, it’s a must-have for the repair of non-working Face ID Modules. The Programmer helps in diagnosing the issue for the non-working of the Face ID Module.
Brand New and Premium Quality: OEM Replacement Part(Infrared FPC Flex Cable) used in the Repair & Maintenance of the non-working Face ID Module(integrated into the Front Camera) of the iPhone. The second most common cause of non-working Face ID is worn and torn or damaged Infrared FPC Flex Cable. Replacing the defective Infrared FPC Flex Cable with a new Flex Cable often solves the issue and brings the Face ID Module back to work.
Compatibility: Compatible with A2215 (International), A2160 (USA, Canada, Puerto Rico, U.S. Virgin Islands), and A2217 (China, Hong Kong). Compatible only with iPhone 11 Pro (Excludes iPhone 11, and 11 Pro Max).
Identifying & Resolving Face-ID Error: There is a need for a Programmer to test the issue in the non-working Face ID Module(integrated into the Front Camera) of the iPhone. Most of the time the issue gets resolved by replacing the Dot Matrix Projector Flex Cable or Infrared FPC Flex Cable. But there is a need to check the TEST STATUS of the Face ID Module before commencing on replacing the Flex Cable. Even after assembling it’s required to be tested to determine whether the problem is resolved.
Quality: The Quality is the same as the Original, the Infrared FPC Flex Cable is not known to give any trouble if installed properly. Please be careful while doing the repair work as all parts are very fragile and do a test with the Programmer before assembling it in the iPhone. Kindly Note: Programmer is not included with this Infrared FPC Flex Cable. However, it’s a must-have for the repair of non-working Face ID Modules.
DIY(Do-It-Yourself) Repair: Please do not try DIY Repair unless and until you are a professional in repairing work or have done such DIY projects before. We are not responsible for any damage caused during the repair work. Getting the old Infrared FPC Flex Cable off is the hardest part of this entire process aligning the new Infrared FPC Flex Cable is a must. Even professionals need hours to complete the task. It is advised to seek professional help to replace the Infrared FPC Flex Cable.